How often should I test my pool water in Cairns?

In tropical conditions like Cairns, pool water should be checked at least once a week. Rain, heat, and pool usage quickly change chemical levels and can lead to algae if not monitored.

Why does my pool keep going green after rain?

Rain dilutes chlorine and stabiliser levels. When sanitiser drops too low, algae can grow rapidly — sometimes within 24–48 hours.

How long should I run my pool pump each day?

Most residential pools need 8–12 hours of circulation daily depending on size, weather, and usage.

How often should my pool be serviced?

Weekly servicing is recommended for most pools. Lower-use pools may be serviced fortnightly during cooler months.

What does a regular pool service include?

Brushing, vacuuming, emptying baskets, water testing, and chemical adjustment to maintain consistent water quality.

Why is my pool cloudy even though chlorine is normal?

Cloudy water is usually caused by filtration issues, fine debris, or incorrect pH — not always low chlorine.

Do I still need servicing if I have a pool cleaner?

Yes. Cleaners remove debris but do not balance chemicals or check equipment operation.

How long should a pool pump last?

Most pool pumps last 5–10 years depending on maintenance and run time.

Why is my pool losing suction?

Common causes include blocked baskets, dirty filters, air leaks, or worn seals rather than pump failure.

When should I clean my pool filter?

Typically every 1–3 months depending on debris load and pool usage.

Should I repair or replace pool equipment?

Many problems can be repaired. Replacement is recommended when reliability or efficiency becomes poor.

What chemicals does my pool actually need?

Most pools require sanitiser, pH control, and stabiliser. Additional chemicals depend on specific water conditions.

Why do I need stabiliser in Cairns?

Strong UV breaks down chlorine quickly. Stabiliser protects chlorine so it remains effective longer.

Are all pool salts the same?

No. Higher-purity salt produces less residue and helps chlorinators operate efficiently.

How do I know how much chemical to add?

Dosage should always be based on a water test and pool volume to avoid imbalance and wasted chemicals.

When does a pool need resurfacing?

Signs include rough surfaces, staining that won’t clean off, or recurring algae in specific areas.

Do energy-efficient pumps really save money?

Yes. Variable speed pumps significantly reduce electricity consumption compared to older pumps.

Can upgrading equipment reduce maintenance?

Modern filtration and chlorination systems improve water stability and reduce chemical demand.

Is it worth upgrading an older pool system?

Upgrades often reduce running costs and improve reliability compared to ongoing repairs.

Madimack - InverFlow Plus 1.0hp F300i Variable Speed - 5yrs wrt (2 yrs Comm)

Name: Allan’s Pool Shop
Address: 69 Anderson Street, Manunda, Manunda, QLD, 4870, AU
Telephone: (07) 4051 9344

SKU	PLUS300i
Package Length	59 cm
Package Width	25.5 cm
Package Height	32.5 cm
Warranty	5 Years
Product Type	Pool Pump
Brand	Madimack
Model	InverFlow Plus F300i (1.0HP)
Shipping Type	Standard
Horse Power	1.0 HP
Watts	750 W
Amps	3.5 A
Energy Efficient (ECO)	Yes
Star Rating	6
Energy Consumption	402.91 kWh/Y (based on 6.33 hours of daily run time)
Noise (Decibels)	35.4 dB(A) at 30% Speed / 51.4 dB(A) at 100% Speed
Retro Fits	AstralPool CTX, E, FX, and XP-Series pumps
Flow Rate (litres per minute)	300 L/min @ 8m Head
Dimensions L × W × H (mm)	544 × 252 × 288

madimack_inverflow_plus_pool_pump_-_brochure

Madimack_InverFlow_Plus_Pool_Pump_-_Manual

Same-day dispatch applies to orders received by 12:00 pm (AEST) on business days. Orders received after 12:00 pm, on weekends, or on public holidays will be dispatched on the next business day.

Free shipping is available for eligible installation orders delivered to the following Queensland postcodes:

4865, 4868, 4869, 4870, 4878, 4879, 4881

For all other Australian postcodes, standard delivery fees apply. Orders containing bulky items, such as sand filters, acoustic boxes, heat pumps, pool covers, and pool slides, may incur additional delivery fees as they require specialised carriers.

Below are the estimated delivery times in business days once an order has been shipped.

Destination	QLD
Business Days	2-3

Rural and remote addresses, where delivery is not provided every day, may take longer.

Returns

We take full responsibility for the safe arrival of the products that you order from us. We will replace at our expense any product that arrives faulty, damaged during transit, or is the incorrect product.

If you have any questions about our shipping policy or our return policy, please contact us on (07) 4051 9344 or through our contact us form.

Description

The Madimack InverFlow Plus F300i (1.0 HP) sets a new benchmark in pool pump innovation – combining advanced inverter technology, smart Wi-Fi control, and whisper-quiet operation. Powered by InverMAC technology, this compact, high-efficiency DC brushless motor adapts its speed to your pool’s needs, delivering up to 80% energy savings.

Key Features:

Energy Efficiency: Advanced inverter technology and DC brushless motor deliver up to 80% energy savings.
Smart Technology: Equipped with smart Wi-Fi control for convenient operation.
Quiet Operation: Whisper-quiet performance for a more peaceful pool environment.
InverMAC Technology: Ensures the pump adapts to your pool’s specific needs.

Easy Installation:

Retrofit-Ready: Designed to replace most major brands without the need for re-plumbing, simplifying the installation process.

Advanced Functionality:

Skimmer Mode: Automatic surface cleaning for a pristine pool.
Active Energy Monitoring: Keep track of energy consumption for optimal efficiency.
Programmable Timers: Includes 4 programmable timers for daily operation, providing flexibility and convenience.

Built for Reliability:

Backed by Madimack’s industry-first 5-year replacement warranty, ensuring peace of mind for years to come.

Recommended Pool Size:

The Madimack InverFlow Plus F300i (1.0 HP) pool pump is generally suited for most standard residential pools up to around 30,000 to 35,000 litres, though the manufacturer states it fits most standard residential setups.

Pool Size and Performance Details:

Recommended Volume: Suited for standard residential pools up to approximately 30 kL to 35 kL.
Flow and Speed: Features full inverter control with a running capacity of 30% to 100%, allowing you to fine-tune flow rates for your specific pool size and turnover needs.
Larger Setups: For pools larger than standard residential sizes or those with complex hydraulic layouts, professional sizing advice from an authorized dealer is recommended.

Upgrade to the Madimack InverFlow Plus F300i and enjoy a smarter, quieter, and more efficient pool system!

Additional information

Weight	16.0 kg
Dimensions	59.0 × 25.5 × 32.5 cm

Reviews

There are no reviews yet.

Be the first to review “Madimack – InverFlow Plus 1.0hp F300i Variable Speed – 5yrs wrt (2 yrs Comm)”